Page tree

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


Some features in Apple devices can only be enabled if the device is Supervised. Supervised The supervised mode makes it possible to prevent a user from connecting the device to other PC's, and can on top of enabling these settings also be used to set special configuration profiles on a device.

Supervised The supervised mode can be used together with the CapaInstaller Mobile Device Management.


The Mac computer needs to have an "Apple Configurator" installed.

Cookbook for supervising a device


Open "Apple Configurator"


Image Modified

  1. Select Prepare, Here you can prepare your "supervised" profile.
  2. Select a name for the device. It can be beneficial to use a name which ends 1, because then "Apple Configurator" will automatically increment the number for each new device.
  3. Decide if the device needs to be Supervised.
  4. Set your
  1. organization information.
  2. Here you can configure some configuration profiles you will prefer to include with the supervised setting.

By clicking apps tab you can deploy some apps together with the profile

Image Modified


By clicking the Setup tab you can decide what pages of the "device setup assistant" that needs to be shown. After a device has been supervised, it will be completely erased and start as a new device.

Image Modified


Now connect the device or devices you prefer to "supervise"


if many devices


need to be supervised it can be beneficial to connect the devices through a USB hub.

Click the "Prepare" button in the bottom of the configurator

Image Modified


The connected devices will now be supervised (it can take up to 10 minutes for each device)

Image Modified


After the device(s) has been supervised, the device(s) can be seen in the supervised pane

Image Modified

8Here you can add or remove some profiles or change other settings.
9Now you can enroll the device in CapaInstaller.

UnSupervising a device

You can remove the supervision state of the device by either wiping the device , or by connecting it to the "Apple Configurator", in the "Supervise" pane and select "UnsuperviseUnsupervised" from the menu